Teac HS-4000 Addendum V1.22 User Manual download pdf (Page 8)

HS-4000

TASCAM HS-4000

Network functions (FTP/telnet/VNC) added

FTP (file transfer protocol)

By using an FTP client application, you can transfer files between this unit

and a computer.

Connect to this unit and login in the same way as with other FTP servers.

After connecting and logging in, “A:” and “B:” will appear in the root directory.

These correspond to the unit's CF1 and CF2 slots. If the corresponding slot

does not contain a card, the “A:” or “B:” will appear empty.

NOTE

To display Japanese, use an FTP application that supports Unicode.

Always set the maximum number of simultaneous transfers of the FTP client

application to "1". If not set to "1" les cannot be transferred properly.

For information about FTP client applications that have been conrmed to work

properly with this unit, please contact TASCAM customer support.

Required settings for connecting by FTP

The following settings are necessary for connecting to this unit by FTP.

IP address: This unit's IP address is shown in the

IP Address

field of

the

REMOTE SETUP

screen

ETHERNET

page.

Port: 21

User name: HS-4000 (cannot be changed, case sensitive)

Password: HS-4000 (default, case sensitive)

This setting can be changed by using the

Password

Change

button on the

REMOTE SETUP

screen

ETHERNET

page.

NOTE

The number of simultaneous connections is "1". Depending on the FTP client

application, two simultaneous connections with this unit might be possible, but

les might not be transferred correctly, so we recommend that you do not use

two or more simultaneous FTP connections with this unit.

FTP connections cannot be made when EXTERNAL Control has been set to LOCK

on the Lock Setup screen. Likewise, setting this to LOCK will end any active FTP

connection.

Changing any settings on the REMOTE SETUP screen of the ETHERNET page will

also end any active FTP connection.

Working with les using an FTP client application

Read les from the unit1.

You can read files from this unit at any time.

Add new les to the unit2.

You can add files to this unit at any time.

When recording, if you add BWF or WAV files to the current session,

they will be shown in the list with existing files, recorded files and

added files in that order.

Overwrite existing les on the unit3.

You can only overwrite the current take when the unit is stopped. You

can overwrite other files

at any time

. See “Important precautions re-

garding overwriting files” below.

Delete a le on the unit4.

The current take can be deleted only when the unit is stopped. Files

other than the current take can be deleted at any time. See “Precau-

tions when deleting files on the unit” below.

Add a new folder to this unit5.

You can add a new folder to this unit at any time.

Delete a folder from this unit6.

You can only delete the current folder when stopped.

You can delete any folder other than the current from this unit at any

time.

Edit the names of les/folders on this unit7.

You cannot edit the names of files/folders on this unit.

CAUTION

If you work with les/folders by FTP during recording, you will not be able to

retake (erasing the last recorded region/take).

Important precautions regarding overwriting files

You cannot overwrite the take that is in use on the playlist mode

ADJUST

screen. You can overwrite other files on

this unit at any time

However, when the

PLAY SETUP

screen

GENERAL

page

Play Mode

setting is

All Take

, you might not be able to overwrite the take following the current

take depending on the timing.

Precaution in playlist mode

In playlist mode, if you overwrite a take that has been added to a playlist as

an entry, a “?” will be shown for the corresponding entry on the

ENTRY

and

file

ASSIGN

screens, and that file will be ignored for playback.

To enable playback of a file that has overwritten another, add the overwrit-

ten file as an entry.

Precautions in on air mode

In on air mode, if you overwrite a file shown in the on air list screen, the

corresponding take will be unchecked and the file will be ignored for

playback.

When the following rebuild confirmation message is shown, touch

When you rebuild all the takes will be enabled for playback (checked), so

deselect any that you do not want to be played back.

Precaution when overwriting files with different properties

If overwriting causes the size, number of channels, bit-rate or sampling

frequency of an audio file to be different from the previous file, inconsisten-

cies could occur in the existing timeline or playlist. If such an inconsistency

occurs, the following error message will appear when you start playback.

Conduct the following to eliminate the inconsistency and stop the error mes-

sage from occurring.

Timeline mode: Erase the affected region.

Take mode: Delete the affected take from the CF card.

Playlist mode: Add the overwritten file as an entry.

On air mode: Use the Home Screen pull-down menu

REBUILD

button.

CAUTION

Do not overwrite an existing audio le with a le that uses a dierent sampling

frequency. The inconformity that results could become unresolvable.

Precautions when deleting files on the unit

The current take can be deleted only when the unit is stopped. Files other

than the current take can be deleted at any time.

Deleting files will cause inconsistencies between the system files and audio

files, so it is necessary to rebuild after deleting a file.

After deleting a file (and stopping if another file has been playing back or

recording), the following rebuild confirmation message will appear. Touch

to rebuild.

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Teac HS-4000 Addendum V1.22 User Manual Page 8

Comments to this Manuals

Related products and manuals for Audio Teac HS-4000 Addendum V1.22