Teac HS-4000 User Manual download pdf (Page 134)

134

TASCAM HS-4000

16 – Troubleshooting

Power does not turn on.

•

Confirm that the power plug, for example, is connected

completely.

Media is not recognized.

•

Confirm that the CF card is securely inserted into the CF

slot.

•

Pause recording or playback.

The unit controls do not function.

•

Is the panel lock function ON?

Playback is not possible.

•

Confirm that the file is compatible with the unit, which

supports sampling frequencies of 44.1, 47.952, 48, 48.048,

88.2 and 96 kHz (47.952/48.048: 48 kHz±0.1% pull-up/

down) and bit rates of 16 and 24.

•

Confirm that the sampling frequencies of the project and

the audio file are the same.

There is no sound.

•

Check the monitoring system connections and the amplifier

volume setting.

•

On the MONITOR MIXER page of the MIXER SETUP screen,

check that the monitor level settings (level knob settings)

are not all the way down.

•

When using a TASCAM RC-HS32PD remote controller (sold

separately), confirm that the fader is not lowered.

•

If you cannot hear the input signal, arm the recording and

turn input monitoring ON.

•

If you cannot hear the playback sound, turn input

monitoring OFF.

•

Check the online function and online playback mode

settings.

•

Check the MIXER SETUP screen SETUP tab to see if the

Monitor Mute by Online item is set to ON. If it is set to ON,

monitoring signals will be muted when online.

Recording is not possible.

•

Reconfirm connections.

•

Adjust the recording levels.

•

If the CF card does not have enough capacity, erase

unneeded data and increase the amount of open space or

change the CF card.

•

If the maximum number of recordable takes or the

maximum take number has been reached, change the

recording session.

•

If the total number of items in the folder, including files and

subfolders, is too large, change the recording session.

Setting changes are not remembered.

•

This unit backs up settings whenever the CF card selection

is changed, a project, session or take is loaded, and

playback or recording occurs.

After startup, if none of these actions is conducted, settings

might not be backed up even if they are changed.

I hear noise.

•

Confirm that none of the cables have problems.

The touch panel does not work properly.

•

Do not use commercially-available protective film for LCD

screens on the touch panel.

•

Confirm that the panel lock function is not engaged and

locking the display.

I cannot create a new project.

•

Confirm that a project with the same name does not

already exist.

•

If the amount of space remaining on the CF card is too

small, a new project cannot be created. Erase unnecessary

data and then try again.

If the operation of this unit becomes irregular, please check the following things before requesting repair.

If the following measures do not resolve the problem, contact the store where you purchased the device or a TEAC Repair Center.

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 151 152

Comments to this Manuals

No comments

Teac HS-4000 User Manual Page 134

Comments to this Manuals

Related products and manuals for Audio Teac HS-4000