Teac AG-H380 User Manual download pdf (Page 31)

ENGLISH

Specifications

AMPLIFIER Section

Output Power .....................40 W/ch (6 ohms, 0.5 %,1 kHz)

Input Sensitivity ........................... PHONO: 2.5 mV 47 kΩ

AUX, CD, TUNER: 200 mV 47 kΩ

Frequency Response ...............20 Hz to 60,000 Hz (+1/–3 dB)

TUNER Section

FM Section

Tuning Range ..........................87.50 MHz to 108.00 MHz

Signal-to-Noise Ratio ..............................65 dB (Mono)

60 dB (Stereo)

AM Section

Tuning Range ...............................522 kHz to 1,629 kHz

Signal-to-Noise Ratio ...................................... 35 dB

USB Section

Playback

Frequency Response ..................20 Hz to 20,000 Hz (±2 dB)

Signal-to-Noise Ratio ............................more than 85 dB

Recording

Frequency Response ..................20 Hz to 15,000 Hz (±2 dB)

Signal-to-Noise Ratio ............................more than 85 dB

GENERAL

Power Requirements .............................230 V AC, 50 Hz

Power Consumption .......................................85 W

0.5 W (standby)

Dimension (W x H x D) .......................215 x 110 x 315 mm

Weight ...................................................4.4 kg

Standard Accessories

Remote Control Unit (RC-1225) x 1

Batteries (AAA) x 2

AM Loop Antenna x 1

FM Lead-type Antenna x 1

Owner’s Manual x 1

Warranty Card x 1

< Design and specifications are subject to change without notice.

< Weight and dimensions are approximate.

< Illustrations may differ slightly from production models.

“No song title No artist No album” appears on the display.

e There is no ID3 tag information for the music file.

Edit the song title, artist, and album information of the song on

a PC using the MP3 or WMA making application.

Some unknown characters are displayed on the display

panel.

e This unit cannot display symbols and full-size or double-byte

characters (such as Japanese, Chinese, etc.) correctly. File name

of MP3 or WMA should be alphanumeric characters.

If normal operation cannot be recovered, unplug the power

cord from the outlet and plug it again.

Maintenance

If the surface of the unit gets dirty, wipe with a soft cloth or

use diluted neutral cleaning liquid. Be sure to remove any fluid

completely. Do not use thinner, benzine or alcohol as they may

damage the surface of the unit.

1 2 ... 26 27 28 29 30 31 32

Comments to this Manuals

No comments

Teac AG-H380 User Manual Page 31

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Teac AG-H380