Teac HD-P2 Quick Start User Manual download pdf

» HD-P2 Quick Start Guide

First Recording

Apply power

Connect the AC power adaptor to your HD-P2; turn

it ON by momentarily pressing the spring-loaded

p o w e r s w i t c h . T h e H D - P 2 w i l l p o w e r u p

immediately. The HD-P2’s operating system is

stored in internal memory, not the CF card, so you

can turn on the HD-P2 without a CF card inserted.

Adjust the Display

Press the DISPLAY key. Turn the DATA wheel to

adjust Contrast for optimal viewing. Press the

DISPLAY key again. Turn the DATA wheel to

adjust Brightness. Press the CANCEL key to end

adjustments. These settings are remembered when

the unit is power cycled.

Insert Media

Insert a media card into the media slot. The HD-P2

will ask if you would like to format the media. If

this is the first time the media has been used with

the HD-P2 (and it has no other data you wish to

keep) press the SELECT key to format the media.

Once formatting is complete the HD-P2 will make

a default project (PROJ0001) and return to the main

screen.

Record Audio

Flip the LEFT INPUT and RIGHT INPUT switches

(top of unit) to MIC. Set the MIC switch to INT.

Press the PAUSE key to enter Monitor mode and

while speaking into the Microphone adjust the input

Levels using the on-screen meters. Press the REC

key and speak into the microphone for a short test.

Press the STOP key when you are done.

Play Audio

Return to the beginning of the audio you just

recorded by pressing the STOP+REW or LOCATE

Ô key. Press the PLAY key. Adjust the Monitor

(Headset) level control to hear the audio in the

speaker, or headset if one is plugged in. Note that

connecting a headset disables the built-in speaker.

Create a New Project

1. Hold the MENU key and press the PROJECT key

2. Use the DATA wheel to scroll to Create New

Project

3. Press the SELECT key

4. Use the DATA wheel to scroll to Use Default

Template

5. Press the SELECT key

6. Press the SELECT key again to confirm (or

wait two seconds)

Load A Project

1. Hold the MENU key and press the PROJECT key

2. Use the DATA wheel to scroll to the project to

be loaded

3. Press the SELECT key

4. Load Project should already be selected

5. Press the SELECT key

Delete A Project

1. Hold the MENU key and press the PROJECT key

2. Use the DATA wheel to scroll to the project to

be deleted

3. Press the SELECT key

4. Use the DATA wheel to scroll to Delete

5. Press the SELECT key

6. Press the SELECT key again to confirm this

action cannot be undone

Rename A Project

1. Press the MENU key

2. Use the DATA wheel to scroll to Project

Menu (this references the currently loaded

project)

3. Press the SELECT key

4. Use the DATA wheel to scroll to Rename

5. Press the SELECT key to enter the naming

interface

1 2 3 4

Summary of Contents

Page 1 - Quick Start Guide

» HD-P2 Quick Start Guide1First RecordingApply powerConnect the AC power adaptor to your HD-P2; turn it ON by momentarily pre

Page 2 - Input Settings

2Set Up Default Project Settings1. Press the MENU key2. Use the DATA wheel to scroll to System Menu3. Press the SELECT key 4. Use the DATA whe

Page 3 - Reformat Media

3Main Menu > Project Menu > Settings > Input SourceChanges the setting for the currently loaded project2. Within Default Project

Page 4 - Transport & Markers

TEAC CORPORATIONPhone: +81-422-52-5082 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, JapanD00903720A Printed in ChinaFireWire DockDock the HD-P2 1

Comments to this Manuals

No comments

Teac HD-P2 Quick Start User Manual

Browse online or download User Manual for Audio Teac HD-P2 Quick Start. Teac HD-P2 Quick Start User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Audio Teac HD-P2 Quick Start