Teac HD-1 User Manual Page 19

  • Download
  • Add to my manuals
  • Print
  • Page
    / 20
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 18
ENGLISH
19
If you have problems with your system, look through this chart
and see if you can solve the problem yourself before calling your
dealer or TEAC service center.
General
The unit does not turn on.
The AC plug may not be connected properly. Check the
connection.
The wall outlet may not function. Try another outlet.
When playing music, the sound gets distorted.
The volume level on the connected device or the HD-1 is
set too high. Decrease the volume until the distortion has
disappeared.
The source sound is distorted. If the original sound source
(MP3) on your iPod is poor quality, the distortion and noises
are easily noticed with high-power speakers.
The remote control does not operate properly.
The installed battery is weak. Replace with a new battery.
It is not aimed to the HD-1 or too far away from it. Move
within 20 feet of the unit and point the remote control
toward the HD-1.
Remote functions like play/pause skip up, skip down does
not work
Depending on the device these functions might be disabled
due to differences in software.
Please refer to owner’s manual of the device you are using.
iPod or iPhone Player
Your iPod or iPhone does not fit into the built-in universal
dock.
The installed dock adapter is not the correct one. Check
whether a correct dock adapter is installed.
There might be some obstructions on the dock. Check
whether there are any obstructions on the connector and on
the dock. If everything is secured, place your iPod back into
the dock.
It does not recognize your iPod or Phone when docked.
Your iPod or iPhone may not be properly docked. Take your
iPod or iPhone out of the dock, and remove any obstructions
on the connector from the dock and on your iPod or iPhone.
Place your iPod or iPhone back into the dock.
Your iPod or iPhone is frozen or locked up. Check whether
your iPod or iPhone operates correctly before placing it back
into the dock. Please refer to the owner’s instruction manual
of your iPod or iPhone.
The software of your iPod or iPhone is outdated. Upgrade
the software on your iPod or iPhone. For the details on how
to upgrade the software on your iPod or iPhone, please visit
Apple’s website: http://www.apple.com.
Your iPod or iPhone is not charged even though it is in the
dock.
Your iPod or iPhone might not be properly docked. Take your
iPod or iPhone out of the dock, and remove any obstructions
on the connector from the dock and on your iPod or iPhone.
Place your iPod or iPhone back into the dock.
Your iPod or iPhone is frozen or locked up. Check whether
your iPod or iPhone operates correctly before placing it back
into the dock. Please refer to the owner’s instruction manual
of your iPod or iPhone.
Your iPod or iPhone will not be charged in Radio mode to
avoid major radio interference.
Tuner
AM band is too noisy.
The reception at the set location is poor. Rotate the AM loop
antenna position for best reception.
Move the antenna away from the unit to avoid interference.
FM band is too noisy.
The reception at the set location is poor. Check that the FM
antenna is properly connected to the jack in the rear of the
unit.
Stretch the antenna to a “T” shape and move slightly closer
to a window.
Troubleshooting
HD-1.indd 19 2008.12.17 9:19:54 AM
Page view 18
1 2 ... 14 15 16 17 18 19 20

Comments to this Manuals

No comments