Teac DV-RA1000HD User Manual download pdf (Page 28)

4 − Basic operations

28 TASCAM DV-RA1000HD

Adjusting the input level

The input level is adjustable for all inputs (analog or

digital), regardless of the current selection.

The balance between the left and right channels of the

input may also be set.

For optimum sonic quality, it is also possible to bypass

the input level and balance circuitry.

1 Press the INPUT LEVEL key to bring up the input

level screen:

Figure 4.19: Input level settings

2 Use the F3 and F4 keys to move between the MAIN

(input level), BALANCE (between left and right) and

BYPASS sections of the display.

Use the

JOG/DATA dial to adjust the settings,

including the bypass setting.

TIP

Use the F1 key to reset the input level to unity

gain, and the F2 key to center the balance set-

ting.

You can adjust the analog input level to one of

the 69 stages in the range of –

∞ through +12 dB,

and the digital input level in steps of 0.5 dB in the

range of –10 dB through +10 dB.

3 Press ENTER when nished.

NOTE

When the signal on playback or recording is at –

0.13 dBFS or over for more than one sample, the

OVER indicator on the meter lights. If a track is

normalized to –0.1 dB (for example) on a DAW be-

fore recording at unity gain on the DV-RA1000HD,

the OVER indicators may therefore light, even

though there is no clipping taking place.

You can set the meter release time and peak hold

mode in the preference screen. (See “General

preferences” on page 24.

)

To reset the peak indication, press the CANCEL

key while the home screen is displayed.

•

Selecting the reference clock

As mentioned earlier, only one clock sync source

should be available within a system.

The current clock selection is always shown on the

home display.

To select the clock source for the DV-RA1000HD:

1 Press the MENU key, and use the JOG/DATA dial

to select SYSTEM SETUP. Press ENTER.

2 Use the JOG/DATA dial to select REFERENCE CLOCK.

Press ENTER.

Figure 4.20: Word sync selection

3 Use the JOG/DATA dial to select the clock source

(SOURCE):

• Internal—the DV-RA1000HD acts as the

clock master.

• Word—the clock sync is received from the BNC

WORD SYNC IN connector.

• Digital IN—the clock is received from the

currently selected digital audio input source.

NOTE

You cannot select Digital IN if the

DV-RA1000HD is playing or recording a project in

DSD mode.

4 Press ENTER to conrm the setting and return to

the system setup menu.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 67 68

Comments to this Manuals

No comments

Teac DV-RA1000HD User Manual Page 28

Comments to this Manuals

Related products and manuals for Players Teac DV-RA1000HD