Teac DV-RA1000HD User Manual download pdf (Page 35)

5 − CD playback & recording

TASCAM DV-RA1000HD 35

NOTE

If time mode is selected, the DELAY parameter is dis-

abled.

Automatic track increment recording in time

mode

In time mode, a recording is automatically divided into

tracks at every specified interval.

Specifying the interval

Move the cursor to highlight TIME INTERVAL on the auto

track screen, then rotate the JOG/DATA dial to set the

interval in the range from 1 through 10 minutes (in

steps of one minute). (The default setting is 5 minutes.)

Press the ENTER key to confirm the setting.

NOTE

A maximum of 99 tracks are allowed on a CD, and

a maximum of 99 tracks in a project on a DVD±RW

or HD. When the number of tracks reaches 99

during recording on a DVD±RW or on the HD, the

DV-RA1000HD will continue recording on the 99th

track.

The sound level screen enables you to set the sound

threshold level for synchronized recording and other

parameters.

To display the sound level screen, move the cursor

to the

SYNC

switch on the rec page of the virtual front

panel, then press and hold the

key or

ENTER

key for

at least one second.

Figure 5.5: Sound level screen

Move the cursor to a desired item, then rotate the

JOG/DATA

dial to set the value.

After you finish making all necessary settings, press

the

ENTER

key to confirm the settings.

Setting the sound threshold level (

SOUND LEVEL

)

Synchronized recording starts when the

DV-RA1000HD detects audio signal level that goes

above a specified sound threshold level.

Select the threshold level from the following options:

–72dB, –66dB, –60dB, –54dB, –48dB, –42dB, –36dB,

–30dB, –24dB

NOTE

The threshold level is also used for the auto cue

function (see “Auto cue” on page 32) and auto-

matic track increment in level mode (see “Auto-

matic track increment in level mode” on page 34)

In DSD mode, if you have selected an option that

is lower than –48 dB, the DV-RA1000HD will use

the –48 dB setting.

•

Settings in the sound level screen

The synchronized recording function enables recording

to start automatically when the start point of the record-

ing source is detected, and to stop automatically when

the end point of the recording source is detected.

In the sound level screen, you can set a detection

threshold to trigger the start and end points of the

source. (See “Setting the sound threshold level (

SOUND

LEVEL

)” below.)

You can also rehearse synchronized recording. Pressing

the

SYNC

switch on the rec page of the virtual front panel

repeatedly will cycle the function through off, rehears-

al, and on.

Recording starts and stops under the following condi-

tions:

If a CD, DAT or MD is the S/PDIF recording source,

recording starts when the signal level rises above the

•

threshold after the Start ID of the PQ code is detected.

mode is on and digital recording takes place

through the

COAXIAL

connectors, recording starts

when the Start ID of the PQ code is detected from a

CD, DAT or MD player.

If the source is analog, or digital other than the

above-mentioned recording starts if one second or

more of “below-threshold” signal is received, fol-

lowed by a signal above the threshold.

If the sound immediately starts at a loud level,

recording will not start.

Recording stops when the signal drops and remains

below the threshold longer than the duration speci-

fied by the

SYNC STOP

parameter, or in the case of

recording from a S/PDIF source, when a digital track

stop signal is received.

•

Synchronized recording

DVD±RW

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 67 68

Comments to this Manuals

No comments

Teac DV-RA1000HD User Manual Page 35

Comments to this Manuals

Related products and manuals for Players Teac DV-RA1000HD