Teac DP-01 Series Quick Start User Manual download pdf

03/01/05

Page 1 of 4

DP-01 / DP-01FX

Quick Start Guide

his guide is designed to get you up-and-running

with the DP-01 and DP-01FX. If you have any

questions that aren’t answered in this short guide,

consult the Users Guide for detailed information

on using your new Digital Portastudio.

Record a Track

he DP-01 gives you eight tracks to record to.

This allows you to record a guitar, rewind, play

bass over that part, and continue repeating until

your song is ﬁ nished.

1. Plug an instrument or microphone into Input

A, on the front of the DP-01.

2. If you plugged a guitar or bass directly into the

DP-01, set the front-panel switch to GUITAR.

Otherwise, set it to MIC/LINE. If you’re using

a condenser microphone on the DP-01FX, turn

phantom power ON.

3. While watching the meters on the LCD screen,

turn the front-panel trim knob so that your

loudest notes do not make the meter go all the

way to the top.

3. Hold down the button above the input labeled

ASSIGN A. While you’re still holding that but-

ton, press the REC button above one of the eight

track faders. It will ﬂ ash to show you that your

input has been assigned to that track.

4. Press the REC button that you just assigned the

input to. It will ﬂ ash slowly.

5. Press the PLAY and RECORD buttons to start

recording. When you’re ﬁ nished, press STOP

and press the REC button to disarm the track.

6. To record another track and play along with the

one you just recorded, ﬁ rst press the ASSIGN A

button and press the REC button of the track

you just recorded to. This “de-assigns” the input

from that track. Press the REC button for one of

the other tracks, rewind to the beginning of the

song, and then repeat steps 4 and 5.

Note: You will hear your instrument through

the master outputs even if no tracks are armed.

Build a New Song

e’ll begin by creating a new song ﬁ le so that

you have a fresh slate to work from.

1. Press the MENU button. Turn the data wheel

until you reach SONG and press the right cursor

button.

2. Turn the data wheel to select CREATE and press

the right cursor button.

3. If you want, use the DATA WHEEL to name your

new song. Otherwise, or afterwards, press EN-

TER.

1 2 3 4

Summary of Contents

Page 1 -

03/01/05Page 1 of 4DP-01 / DP-01FX Quick Start GuideThis guide is designed to get you up-and-running with the DP-01 and DP-01FX. If you have

Page 2

03/01/05Page 2 of 4DP-01 / DP-01FX Quick Start GuideUsing the Reverb Effect (DP-01FX)The DP-01FX has a dedicated Reverb effect that’s availab

Page 3

03/01/05Page 3 of 4DP-01 / DP-01FX Quick Start GuideBounce TracksLet’s say you’re recording your rock opera and you need more tracks than you

Page 4

Comments to this Manuals

No comments

Teac DP-01 Series Quick Start User Manual

Browse online or download User Manual for Audio Teac DP-01 Series Quick Start. Teac DP-01 Series Quick Start User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Audio Teac DP-01 Series Quick Start