Teac DP-01 Series Quick Start User Manual download pdf (Page 2)

03/01/05

Page 2 of 4

DP-01 / DP-01FX

Quick Start Guide

Using the Reverb Effect (DP-01FX)

he DP-01FX has a dedicated Reverb effect that’s

available to all tracks. Each channel has an Ef-

fect Send knob so that you can control the amount

of reverb – lots of reverb for the drums, a little on

the vocal, etc. Here’s how you set that up.

1. If the REVERB light is not on, hold the SHIFT

button and press REVERB.

2. Let go of the SHIFT button and press REVERB

again. The LCD window will show you what

reverb type is selected.

3. Turn the TYPE knob to change to a different

reverb type: Hall, Room, Live or Studio.

4. Turn the PARAMETER knob to change the decay

time of the reverb for a larger or smaller-sound-

ing space.

5. Send your recorded tracks to the reverb proces-

sor using the EFFECT SEND knobs above those

channel faders and adjust the overall level of

the external effect using the EFFECT RETURN

knob.

Using the Multi Effect (DP-01FX)

he DP-01FX has two effects processors. The

Multi effect processes the input as it’s recorded

to disk, while the Reverb effect is only for the mix-

down and only gets recorded when you master your

song. This section explains how to use the Multi:

1. Plug a guitar or other sound source into one of

the front-panel inputs.

2. Set the INPUT MODE switch on the front panel

to MONO.

3. While holding SHIFT, press the MULTI button.

The LED next to the button will show whether

the effect is processing the A input, B input or

neither one.

4. Let go of the SHIFT button and press MULTI

again. The LCD screen will show you what ef-

fect program is selected. The ﬁ rst line shows

the name of the program (“CoolPick”), and the

second line shows what instrument it’s designed

for (“EGTR”).

5. Turn the TYPE knob to change to a different

effect program.

6. Turn the PARAMETER knob to change the sound

of that program.

Using External Effects

f you have a reverb or multieffects processor, you

can plug it into the DP-01 to use in your mix.

1. Plug the SEND on the rear panel of the DP-01

into the input of your effects processor.

2. Plug the outputs of your effects processor into

the RETURN inputs of the DP-01.

3. Set the Mix control on your effects processor to

100% wet.

4. [DP-01FX only] Turn off the internal reverb pro-

cessor by holding the SHIFT button and pressing

the REVERB button (the light will go out).

5. Send your recorded tracks to the effects proces-

sor using the EFFECT SEND knobs above those

channel faders.

6. You can adjust the overall level of the external

effect using the EFFECT RETURN knob.

1 2 3 4

Comments to this Manuals

No comments

Teac DP-01 Series Quick Start User Manual Page 2

Comments to this Manuals

Related products and manuals for Audio Teac DP-01 Series Quick Start