Teac DP-01 Series Quick Start User Manual download pdf (Page 3)

03/01/05

Page 3 of 4

DP-01 / DP-01FX

Quick Start Guide

Bounce Tracks

et’s say you’re recording your rock opera and

you need more tracks than you have available.

You can “bounce” tracks on the DP-01, which means

mixing them down to other tracks and recording

over the ﬁ rst set of tracks. To do this:

1. Press the BOUNCE button. (It lights up in Bounce

mode)

2. Press the REC button above the track you want

to bounce to. If you want to mix your tracks

in stereo (leaving six available), press the REC

button over a second track.

3. You can record yourself using the inputs dur-

ing your bounce. If you don’t want to do this,

unplug any mics or guitars to make sure there

isn’t any noise on your tracks.

4. Press PLAY and RECORD at the beginning of your

song. You can change the levels, panning (in

stereo) and effects while you record the bounce.

Press STOP at the end of the song.

5. You can now record new parts over your previ-

ous tracks.

Mix Your Song

nce all of the parts in your arrangement have

been recorded, you’ll want to mix these down

to a stereo master track to transfer to CD, MP3 or

some other format that you can share.

1. Use the channel faders to set the level for each

track.

2. Turn the PAN knobs to adjust the stereo position

for each track.

3. Use the EQ HIGH and EQ LOW knobs to adjust

the tone of each track.

4. Use the EFFECT SEND knob to send a track to

an external effects processor (if attached) or

built-in reverb (DP-01FX only). Use the EFFECT

RETURN knob to control the overall level of the

effect.

5. When you have a mix you’re happy with, press

the MASTER button. It will start ﬂ ashing.

6. Rewind to the beginning of your song. Hold

the SHIFT button and press SET IN to set your

beginning point.

7. Fast Forward to the end of your song. Hold the

SHIFT button and press SET OUT.

8. Rewind to the beginning of the song. Make sure

the MASTER light is still ﬂ ashing and press PLAY

and RECORD.

9. As your mix is being recorded, you can change

levels, panning, effects and even fade the Master

level down at the end of the song. When the

recorder reaches the end of the song (which

you set using the SET OUT button), recording

will stop.

10. Press the MASTER button again. It will light up

solid. You can rewind to the beginning of the

song and listen to the mix you just recorded.

If you’re happy with your mix, you’ll want to

transfer it to a computer to encode it as an MP3 or

burn it to a CD. See the next step for information

on how to do this.

1 2 3 4

Comments to this Manuals

No comments

Teac DP-01 Series Quick Start User Manual Page 3

Comments to this Manuals

Related products and manuals for Audio Teac DP-01 Series Quick Start