Teac AD-RW900-B User Manual download pdf (Page 46)

Timer-Controlled Playback and Recording (2)

Set the audio timer to your desired start (power on) and

stop (power off) times.

When this setting is completed, the power to all components

should be turned off.

At this time, do not press the AD-RW900 POWER button.

Leave the button pushed in (the on position). If the

POWER button is in the off position, timer playback will

not function.

When the preset start time is reached, power will be supplied

and playback will start automatically.

< When you do not want to use the timer, set the OFF-PLAY-REC

switch to the OFF position.

Timer-Controlled Recording (

)

< The timer recording source can only be an external device

connected to the LINE inputs. And the timer recording can only

record to cassette tape.

< The recording level is set to 0 dB; it cannot be adjusted.

(Example: Recording a broadcast program)

Connect this unit and a stereo system to a commercially

available audio timer (see page 45).

Set the power switches of all components to ON.

Prepare the cassette tape that you want to record to with

timer recording.

Recording always starts from “side A”.

To record on a single tape side, set the REV MODE switch to u.

To record on both tape sides, set the REV MODE switch to j

or p.

Set the DOLBY NR switch (page10).

If the erasure prevention tabs of the cassette tape have been

broken off, cover the holes using pieces of adhesive tape.

You can record on Normal (type ) and Chrome (type ) tapes

with this unit.

NOTE

If you have previously used the cassette, and the tape is stopped

part of the way through “side B” of the cassette, timer recording will

then start part of the way through “side A”. Always bear this in mind,

so that you do not accidentally erase any important recordings. You

should take special note of this when recording more than once on

the same cassette using the timer recording function.

Set the CD-TAPE-USB switch to TAPE.

< This unit cannot record to CDs and USB flash drives with the

timer recording.

Set the OFF-PLAY-REC switch to the REC position.

“TIMER” and appear on the AD-RW900’s display.

Tune in the station that you want to record (when

recording from radio).

Set the audio timer to your desired start (power on) and

stop (power off) times.

When this setting is completed, the power to all components

will be switched off.

At this time, do not press the AD-RW900 POWER button.

Leave the button pushed in (the on position). If the

POWER button is in the off position, timer recording will

not function.

When the preset start time is reached, power will be supplied

and recording will start automatically.

< When you do not want to use the timer, be sure to set the OFF-

PLAY-REC switch to the OFF position to prevent accidentally

recording over an important cassette tape.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 147 148

Comments to this Manuals

No comments

Teac AD-RW900-B User Manual Page 46

Comments to this Manuals

Related products and manuals for Players Teac AD-RW900-B