Teac DV-RA1000 User Manual download pdf (Page 24)

4 – CD playback & recording

24 TASCAM DV-RA1000 Owner’s Manual

Repeat playback

Use the Virtual Front Panel (see “The virtual front

panel (VFP)” on page 17)

RPT function to change

between single-track and whole disc repeat (and off).

The remote control unit’s

REPEAT key also allows

these choices, but the RC-RA1000 also adds an A-B

repeat loop.

A-B repeat Use the A-B key on the remote control

unit to set the A and B points. the first press sets the

A point, the next press sets the B point, and a third

press cancels the loop.

NOTE

This feature can also be used with DVD playback.

Jog playback

You can use the wheel to jog the playback position

backwards and forwards.

• Press and hold the

READY key and press the

PLAY key.

Both keys flash. You can now use the wheel to

move the play position back and forwards

through the current track/file.

Press the

READY key alone to exit from the jog

mode, and leave the playback position at the

position selected with the wheel.

• You can also use the

JOG/DATA keys on the

RC-RA1000 remote control unit as jog keys.

NOTE

This feature can also be used with DVD playback, but

not in DSD mode.

Pitch change

This is another VFP function (see “The virtual front

panel (VFP)” on page 17) for playback only.

The reference clock must be set to the internal clock

for this feature to operate.

Move the cursor to the

PITCH on-screen button and

press

ENTER briefly to turn on pitch change.

Press and hold

ENTER for about a second to enter the

pitch change setting screen:

Use the

F1 and F2 keys to navigate, and the wheel to

set the value of the pitch (and speed) up to ±6% away

from nominal.

Press

ENTER to make the setting.

Note that the digital I/O can function at ±6% of nom-

inal, but cannot function outside this range.

NOTE

This feature can also be used with DVD playback.

Auto cue

This allows the playback position to be cued to the

first point in a track (or file) where the audio rises

above the threshold level.

This feature can be used together with the auto ready

function (“Auto ready” on page 25).

NOTE

Note that this function is not available on DVDs

recorded in DSD mode.

Use the Virtual Front Panel (see “The virtual front

panel (VFP)” on page 17)

ACUE function or the

remote control unit’s

A.CUE key to turn this function

on or off.

NOTE

This feature can also be used with DVD playback, but

not in DSD mode.

Figure 4.2: Pitch control

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 47 48

Comments to this Manuals

No comments

Teac DV-RA1000 User Manual Page 24

Comments to this Manuals

Related products and manuals for Players Teac DV-RA1000