Teac DV-RA1000 User Manual download pdf (Page 35)

5 – DVD playback & recording

TASCAM DV-RA1000 Owner’s Manual 35

Assemble, the elapsed time of the assembled

track is shown.

TIP

In the same way as when the DV-RA1000 is recording

CDs, pressing

RECORD

while recording will create a

track division (but not in DSD recording). Also, to create

several tracks from one recording (for example, when

making a live recording), you can use the file divide

function (see “Dividing files” on page 37).

4 Press STOP to finish recording.

CAUTION

The

DISC

indicator continues to flash for a few seconds

after recording has finished. Do not cut off the power

to the DV-RA1000 while the indicator is flashing, or the

recording may be corrupted.

Recording mode

It is possible to assemble a single track from a num-

ber of recording sessions. In other words, stopping

recording and restarting does not automatically

increment a new track.

NOTE

This function is only available with DVDs recorded in

PCM mode.

This function is called the “recording mode” and it is

available from the virtual front panel (see “The vir-

tual front panel (VFP)” on page 17), as well as from

the dedicated

REC MODE key on the RC-RA1000

remote control unit.

Normal (or N on the virtual front panel) means that

stopping and restarting recording will add a new file

to the disc.

Assemble (or A on the virtual front panel) means

that recordings will be “assembled”. If the playback

position when record ready is entered is at the end of

a track, the new material will be added to the end of

that track. Note that the original track does not have

to be the last track recorded in the project.

If the playback position when recording starts in

assemble mode is part of the way through a track, the

original track from that position to the end of the

track will be replaced by the new material.

Playing back files

Use the DV-RA1000 in much the same way as a CD

player when playing back the files recorded on DVD.

Repeat functions, etc. will work as with CDs.

Play lists

A play list is a list in which files are assigned to

tracks on a DVD disc. Unlike a programmed play-

back list (see “Programmed playback” on page 23),

each file in a play list must appear once (and only

once).

TIP

Only one play list per project can be created, but it is

possible to program a play list so that the tracks are

played in a different order or tracks are missed out, etc.

Play lists are created from the files present in a

project in the following way:

1 Press

MENU and use the wheel and ENTER to

select the

DVD menu. From there, select the EDIT

sub-menu.

2 From this sub-menu, select

PLAYLIST.

3 Use the wheel to highlight a file.

4 Use the

F1 (up) and F2 (down) keys to move

the highlighted file up and down in the play

list order.

5 Press

ENTER when done.

Figure 5.5: Editing a play list

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 47 48

Comments to this Manuals

No comments

Teac DV-RA1000 User Manual Page 35

Comments to this Manuals

Related products and manuals for Players Teac DV-RA1000