Teac DV-RA1000 User Manual download pdf (Page 34)

5 – DVD playback & recording

34 TASCAM DV-RA1000 Owner’s Manual

Changing the name of a project

1 Press MENU and use the wheel and ENTER to

select the

DVD menu. From there, select the

PROJECT sub-menu.

2 Highlight the

OPEN sub-menu to show a list of

the names of all projects on the disc, together

with their sampling frequencies (see Figure

5.4, Loading a project).

The current project is shown with an arrow

beside the name.

3 Use the wheel to move the cursor to the

project to be renamed, and press either the

F4 key.

You can then edit the name of the project as

explained in “The DV-RA1000 has two types

of “home screen”, depending on whether a CD

or DVD disc is being used.” on page 14.

4 Press

ENTER when done.

Deleting a project from disc

1 Press MENU and use the wheel and ENTER to

select the

DVD menu. From there, select the

PROJECT sub-menu.

2 Highlight the

OPEN sub-menu to show a list of

the names of all projects on the disc, together

with their sampling frequencies.

The current project is shown with an arrow

beside the name (see Figure 5.4, Loading a

project).

3 Press the

F1 (ERASE) key to delete the high-

lighted project. You are asked to confirm the

deletion. Press

ENTER to delete, or CANCEL to

cancel the operation.

All files in the project will be deleted along with the

project itself.

Formatting a disc

When a disc that has already been used is formatted,

a new project is automatically added to the disc.

Reformatting a DVD+RW disc on the DV-RA1000

will never result in an entirely blank disc (but of

course, all previous data is removed during a format

process).

CAUTION

If you attempt recording many times to the same

DVD+RW disc and erasing or formatting it often, you

may find that it does not record properly. You should

use a new disc for any really important recordings.

1 Press MENU and use the wheel and ENTER to

select the

DVD menu. From there, select the

DISC sub-menu.

2 From this sub-menu, select

FORMAT.

3 Enter a name and sampling frequency for the

first project to be created on the newly-for-

matted disc (see “Adding a new project” on

page 33).

4 Press

ENTER to start the formatting process.

This will take a few minutes, and the unit is

not usable while the format takes place.

NOTE

You cannot use DVD+RW discs which have been format-

ted on a computer for recording with the DV-RA1000.

Recording files to disc

Once a project has been set up, audio files can be

recorded at the sampling frequency and word length

specified by the project.

1 Press the

RECORD key. While the disc and

drive are being “lined up” for recording, the

READY indicator flashes, and the DISC indica-

tor also flashes.

2 When the

READY indicator is lit, press PLAY

to start recording.

3 The

DISC indicator flashes while writing is

taking place.

While recording, the display shows either the

elapsed time of the track, or the remaining

time on the disc (change this with the

DISPLAY

key). Note that if the recording mode is set to

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 47 48

Comments to this Manuals

No comments

Teac DV-RA1000 User Manual Page 34

Comments to this Manuals

Related products and manuals for Players Teac DV-RA1000