Teac UH-7000 User Manual download pdf (Page 23)

TASCAM UH-7000

5 – Mixer Panel Settings

Mixer Panel menu

To reset the mixer settings to their original values, use the

Windows File menu or the Mac TASCAM UH-7000 Mixer Panel

menu.

Windows Mixer Panel menu

Mac Mixer Panel menu

Effect Reset

Select this to reset all the settings on the EFFECTS page. (See

“Resetting the effect settings” on page 23.)

Mixer Reset

Select this to reset the settings on the MIXER page. (See

“Resetting the mixer settings” on page 24.)

ADC Preset

Select this to set the parameter values on the Mixer Panel

screens to values that are useful when using this unit as an A/D

converter. (See “Using the unit as an A/D converter” on page

24.)

ADC/DAC Preset

Select this to set the parameter values on the Mixer Panel

screens to values that are useful when using this unit as an

A/D and D/A converter. (See “Using the unit as an A/D and D/A

converter” on page 25.)

Save

Select this to save the current Mixer Panel settings in the

memory of the unit. These saved settings will be used by the

unit when it is in standalone mode. (See “Saving Mixer Panel

settings to the unit memory” on page 25.)

Select to close the Mixer Panel.

Resetting the effect settings

Follow these procedures to reset all the settings on the EFFECTS

page.

CAUTION

After resetting, you cannot restore the previous settings.

1. In the menu bar, Click “File” on a Windows PC or click

“TASCAM UH-7000 Mixer Panel” on a Mac to open a

pulldown menu, and click “Effect Reset...”

The following confirmation message will appear.

Windows confirmation message

Mac confirmation message

2. Click the “OK” button in the message window to reset the

effect settings to their default values.

The items reset are as follows.

o COMPRESSOR

THRESHOLD, RATIO, ATTACK, RELEASE, GAIN

o NOISE SUPPRESSOR

THRESHOLD, SUPPRESSION, ATTACK, RELEASE

o DE-ESSER

FREQUENCY, DEPTH

o EXCITER

FREQUENCY, DEPTH

o EQ

GAIN for all frequency bands (LOW, MID, HIGH) and MID

FREQ Q

o REVERB

ROOM TYPE, PRE DELAY, REVERB TIME

NOTE

•

Click the “Cancel” button to return to the Mixer Panel

without resetting.

•

The Effect Reset function does not change the effect on/

off status or the dynamics effect assignment. Use the Mixer

Reset function to restore these settings to their defaults.

See the effect explanations for the default settings of each

effect.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 35 36

Comments to this Manuals

No comments

Teac UH-7000 User Manual Page 23

Comments to this Manuals

Related products and manuals for Audio Teac UH-7000