Teac UH-7000 User Manual download pdf (Page 5)

TASCAM UH-7000

1 – Introduction

Thank you for purchasing the TASCAM UH-7000 HDIA Mic

Preamp/USB Audio Interface.

Before connecting and using this unit, please take time to

read this manual thoroughly to ensure you understand how to

properly set it up and connect it, as well as the operation of its

many useful and convenient functions. After you have finished

reading this manual, please keep it in a safe place for future

reference.

You can also download the Owner's Manual from the TEAC

Global Site (http://teac-global.com/).

Should the contents of the memory of a connected device

(including hard disks and optical discs) in the same system as

this unit be lost, our company will bear no responsibility for

repair, including for compensation.

Features

•

This product uses high quality parts that have established

records of use in professional audio equipment and

our unique TASCAM High Definition Instrumentation

Architecture (HDIA) mic preamps (−128dBu EIN) to provide

mic preamp circuits and AD/DA converters of outstanding

audio quality

•

The temperature-compensated crystal oscillator (TCXO) for

the internal audio clock has 1ppm precision

•

Supports up to 192kHz/24-bit resolution

•

Audio interface function supports up to 4 channels of

inputs and outputs (2 analog and 2 digital) using USB 2.0

(type B connector)

•

Includes 2 channels of balanced XLR mic inputs that can

provide +48V phantom power and 2 channels of balanced

TRS inputs

•

Analog outputs include XLR line and headphones outputs

•

XLR digital input and output support both AES/EBU and S/

PDIF formats

•

Each mic/line input (INPUT 1/INPUT 2) has a dedicated large

trim knob that allows precise level adjustment

•

Each mic/line input (INPUT 1/INPUT 2) has a large LED level

meter (with 20 bars each) that is very visible

•

Link line function enables adjustment of line output levels

•

Built-in AC power supply with a three-prong inlet

•

Chassis and trim knobs use thick aluminum materials

•

Half-rack size can be used in various situations, including as

a desktop module or mounted in a rack

•

The MIXER PANEL button on the front of the unit can be

used to quickly open a screen on the computer display

where settings can be changed

•

On-board digital mixer allows input from the audio inputs

and the computer to be mixed and output

•

Built-in DSP effect processor allows dynamics effects to be

applied to the inputs and send effects to be used on a send

bus (operation possible from computer)

•

Multitrack mode supports multitrack recording (when used

with a DAW, for example)

•

Direct monitoring function allows input monitoring with

low latency

•

Dedicated drivers and applications available for both

Windows and Mac operating systems

•

Standalone mode allows this unit to be used when not

connected to a computer

•

Standalone mode operation settings can be changed

according to the use conditions and other needs

Note about computer operation

If you are unsure about anything related to the basic operation

of a computer when it is mentioned in an explanation in this

manual, please refer to the computer operation manual.

A dedicated driver must be installed on a computer to use this

unit with it. For details about driver installation, see “Installing

the driver” on page 9.

Included items

This product includes the following items.

Take care when opening the package not to damage the items.

Keep the packing materials for transportation in the future.

Please contact the retailer where you purchased this unit if any

of these items are missing or have been damaged during trans-

portation.

• Main unit ..............................................................................................× 1

• Power cord ...........................................................................................× 1

• USB cable .............................................................................................× 1

• Warranty card .....................................................................................× 1

• Quick Start Guide ..............................................................................× 1

Conventions used in this manual

The following conventions are used in this manual.

•

Buttons, connectors and other physical parts of this unit are

written using a bold font like this: PHONES LEVEL knob.

•

Information shown on the computer display is written like

this “OK”.

•

As necessary, additional information is provided under TIP,

NOTE and CAUTION headings.

TIP

These are tips about how to use the unit.

NOTE

These provide additional explanations and describe special

cases.

CAUTION

Failure to follow these instructions could result in injury,

damage to equipment or lost recording data, for example.

1 2 3 4 5 6 7 8 9 10 ... 35 36

Comments to this Manuals

No comments

Teac UH-7000 User Manual Page 5

Comments to this Manuals

Related products and manuals for Audio Teac UH-7000