Teac DV-RA1000HD User Manual download pdf (Page 30)

30 TASCAM DV-RA1000HD

Playback

The following apply when the DV-RA1000HD is used

to play back CD, CD-R or CD-RW discs. Many of these

features also apply to playback of DVD and HD record-

ed on the DV-RA1000HD.

Basically, the DV-RA1000HD works in the normal way

as a CD player and in a very similar way to many CD

recorder.

However, there are a number of features that may not be

immediately obvious.

Functions marked with a

DVD

indicator in this

chapter are available for DVD or HD playback respec-

tively. Functions marked with a

DVD±RW

are

available for DVD±RW or HD recording respectively.

DVD

refers to both DVD±RW and DVD±R, and

refers to the HD of DV-RA1000HD.

Certain functions are not available in DSD mode, and

this is noted in the corresponding sections.

The transport keys enable you to play a disc as if you

were using a standard CD player.

To start playback, press the PLAY key while

the transport section is stopped or playback

is paused.

To stop playback, press the STOP key.

To pause playback, press the READY key.

To resume playback after the playback is

paused, press the PLAY key.

To mute the playback signal (i.e., silent play-

back), press the MUTE key. Press the MUTE

key briefly to mute the signal. Press the

•

MUTE key again to unmute the signal. Press

and hold the MUTE key to mute the signal

until you release the key. Release the MUTE

key to unmute the signal. While the signal is

muted, the MUTE key indicator lights up.

To skip the tracks backward or forward,

press the / keys.

To perform cue search during playback,

press and hold the / keys on the front

panel or the / keys on the remote con-

trol unit. You will hear an intermittent fast

playback sound at a very low volume.

•

Basic playback operation

DVD

Use the

DISPLAY

key on either the main unit or the

RC-RA1000 remote control unit to cycle through track

elapsed time, track remaining time, total elapsed time,

and total remaining time (on playback).

While recording, track elapsed time and recording

remaining time are the only options available.

In stopped mode, the choices are track elapsed time,

track remaining time, total time, total remaining time

(and recording remaining time on recordable discs).

Display

DVD

To program the order of track playback, use the pro-

gram list accessible from the Virtual Front Panel. (See

“The virtual front panel (VFP)” on page 23.) The

PGM

key on the remote control unit can also be used to

access this screen and turn programmed playback on

and off.

The order of programmed playback is not stored when

power is turned off.

When programmed playback is turned on, the screen

shows a list of tracks which can be edited as follows:

Figure 5.1: Programmed playback

Use the JOG/DATA dial to scroll through the

list of tracks at the left of the screen.

Add tracks to the end of the program list

using the F1 (ADD) key.

•

Programmed playback

DVD

5 − CD playback & recording

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 67 68

Comments to this Manuals

No comments

Teac DV-RA1000HD User Manual Page 30

Comments to this Manuals

Related products and manuals for Players Teac DV-RA1000HD