Teac DV-RA1000HD User Manual download pdf (Page 45)

6 − DVD±RW/HD playback & recording

TASCAM DV-RA1000HD 45

Once a project has been set up, audio files can be

recorded at the sampling frequency and word length

specified by the project.

Press the

RECORD

key. While the disc and drive

are being “lined up” for recording, the

READY

indicator ashes.

When the

READY

indicator is lit, press

PLAY

start recording.

While recording, the display shows either the

elapsed time of the track, or the remaining time

on the disc (change this with the

DISPLAY

key).

Note that if the recording mode is set to Over-

write, the elapsed time of the overwritten track is

shown.

TIP

In the same way as when the DV-RA1000HD is

recording CDs, pressing RECORD while recording

will create a track division. Also, to create several

tracks from one recording (for example, when mak-

ing a live recording), you can use the ﬁle divide

function. (See “Dividing ﬁles” on page 48.)

Note that tracks divided in this way cannot be less

than four seconds in length. Also note that repeated

track divisions creating many short tracks (of ﬁve

seconds or so) may cause the unit to stop record-

ing. We recommend that you use manual track divi-

sion to create tracks of about 30 seconds in dura

tion.

To mute recording (that is, recording silent part),

press and hold the MUTE key. Release the MUTE key

to unmute recording.

While recording is muted, the MUTE key indicator

lights up.

Press

STOP

to nish recording.

Recording files to disc

In normal recording mode, stopping and restarting a

recording will create a new track.

On the other hand, in overwrite mode, restarting a

recording will overwrite data from the current position

in the same track. For example, if you stop then resume

recording, a new track will not be added to the disc.

Instead, recording will continue from the point at which

you previously stopped on the same track. If the play-

back position is located in the middle of the current file

and you start recording in overwrite mode, new data

will be written over the existing data from the point at

which you started recording, in much the same way as

an analog tape recorder.

NOTE

Overwriting mode is available only for recording in

PCM mode on a DVD±RW disc or in the HD.

To select a recording mode, use the

RMODE

switch on the

rec page of the virtual front panel, or the

RECMODE

key on the RC-RA1000 remote control unit.

Normal mode

“

” appears above the

RMODE

switch on the rec page of

the virtual front panel.

Overwriting mode

“

” appears above the

RMODE

switch on the rec page of

the virtual front panel.

NOTE

To view the current recording mode, open the rec

page of the virtual front panel. The mode setting is

not displayed on the home screen.

Recording mode

1 Select the DISC sub-menu from the main menu.

2 Highlight the FORMAT sub-menu and press ENTER.

3 Enter a name and sampling frequency for the

rst project to be created on the newly-formatted

disc. (See “Using a new DVD±RW disc” on page

41).

4 Press ENTER to start the formatting process.

This will take a few minutes, and the unit is not

usable while the format takes place.

NOTE

You cannot use DVD±RW discs which have been

formatted on a computer for recording with the

DV-RA1000HD.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 67 68

Comments to this Manuals

No comments

Teac DV-RA1000HD User Manual Page 45

Comments to this Manuals

Related products and manuals for Players Teac DV-RA1000HD