Teac MCDV600 User Manual download pdf (Page 35)

DIGITAL AUDIO SETUP (DIGITAL OUTPUT)

You can select the audio signal output suitable for the connected

device when playing the digital source.

OFF

Select this when you do not use the DIGITAL OUT or HDMI out

terminal.

No signal is output from these terminals.

ALL

Select this when the unit is connected to an audio component

equipped with a built-in digital audio decoder via the DIGITAL OUT

or the HDMI out terminal.

PCM only (Default)

Select this when the unit is connected to an audio component

such as amplifier/receiver, CD recorder or MD deck via the DIGITAL

OUT or the HDMI out terminal.

DOLBY DIGITAL SETUP (DUAL MONO)

You can select the channel output for the DVD discs recorded in

Dolby digital.

STEREO

Left channel is output from the left speaker, and right channel is

output from the right speaker.

L-MONO

Left channel is output from the front left and right speakers.

R-MONO

Right channel is output from the front left and right speakers.

Settings (AUDIO SETUP)

3D PROCESSING (Reverb mode)

This setting provides following sound effects by using just two

speakers:

OFF

CONCERT

LIVING ROOM

HALL

BATHROOM

CAVE

ARENA

CHURCH

AUDIO SYNC

This setting can cause delays in the sound signal in 10 ms increments

ranging from 0 ms to 200 ms (only for digital signals recorded on a

disc or stored in an USB device; unavailable for analog signals coming

from AUX 1 or 2).

Depending on the TV, it may take approximately 100 ms (0.1 sec.) for

an image to appear after video signals are input, causing the image

to appear after the sound coming from the MC-DV600 is heard.

If this happens or audio and video synchronization creates a less

than optimal viewing experience, adjust the delay with the left

(decrease) or right (increase) Cursor (g/t) buttons.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 47 48

Comments to this Manuals

No comments

Teac MCDV600 User Manual Page 35

Comments to this Manuals

Related products and manuals for Acoustics Teac MCDV600