Teac MCDV600 User Manual download pdf (Page 11)

S-video output terminal

Use a commercially available S-video cable to connect the unit to

the S-video input of a suitably equipped TV or monitor. Use this

connection in preference to a composite video connection.

Component video output terminals

Use commercially available component video cables to connect

the unit to the component video inputs of a suitably equipped

TV or monitor to enjoy a high-quality picture.

Use these terminals in preference to S-video or composite video

connections.

< If the component video terminals are connected to a TV with

progressive scan capabilities, the output can be set to match this

(page 36).

< Note that these terminals cannot be connected to high definition

component terminals.

Composite video output terminal

Use the supplied RCA (pin) video cable to connect the unit to the

composite video connector of a TV or monitor.

Use this connection only if no other video connection method is

available.

< Adjust the video aspect ratio to match that of the TV (page 34).

< This unit adopts analog copy protection features. If the unit is

connected to a TV through a VCR (video cassette recorder), the

resulting playback may be affected. Connect the unit directly to

the TV.

< In all cases, use the highest quality cables for the best possible

picture.

< Select proper setting in the VIDEO OUTPUT setup (page 36).

HDMI video/audio output terminal

Use a commercially available HDMI cable to connect the unit to a

HDMI compatible TV or monitor.

< If the TV or monitor is equipped only with a DVI terminal, a

suitable adaptor cable or adaptors should be used. Note that the

TV connected in this way must be HDCP compatible.

Also note that this connection outputs no sound.

< Make sure that you read and understand the documentation

provided with the HDMI component.

HDMI video output formats

< 480p (NTSC) or 576p (PAL)

< 720p

< 1080i

< 1080p

< See page 37 for further details on HDMI video output formats.

To output audio from the HDMI terminal

If the connected HDMI component is capable of inputting HDMI

audio, digital audio can be output from the HDMI terminal.

< Select “ALL” or “PCM only” in the DIGITAL AUDIO SETUP (DIGITAL

OUTPUT) (page 35).

< To enjoy the digital surround audio from DVD-Video discs,

connect the HDMI terminal to a surround amplifier and set the

DIGITAL AUDIO SETUP (DIGITAL OUTPUT) to “ALL” (page 35).

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 47 48

Comments to this Manuals

No comments

Teac MCDV600 User Manual Page 11

Comments to this Manuals

Related products and manuals for Acoustics Teac MCDV600