Teac MCDV600 User Manual download pdf (Page 45)

Specifications

DVD player

Pickup ............Semiconductor laser, Wave length 650/790 nm

Signal system .........................................NTSC/PAL

Video signal horizontal resolution .....More than 500 lines (DVD)

Video signal-to noise ratio ................More than 50 dB (DVD)

Audio frequency response ...........50 Hz to 20 kHz (+1 / –3 dB)

Audio signal-to-noise ratio ................................ 65 dB

Dynamic range ........................................... 80 dB

Video output

Output level ....................................1 Vp-p (75 Ω)

Jacks ............................................... RCA jack

Component video output (Y, C

B/PB, CR/PR)

Y-Output level ................................ 1.0 Vp-p (75 Ω)

B/PB, CR/PR-output level ...................... 0.7 Vp-p (75 Ω)

Jacks .............................................. RCA jacks

HDMI output

Jack ............................... HDMI 19 pin (version 1.2a)

Amplifier

Output power (main unit)

(Stereo, EIAJ, 20 Hz to 20 kHz, 4 Ω) .................. 20 W + 20 W

(Stereo, 1 % THD, 20 Hz to 20 kHz, 4 Ω) ..............10 W + 10 W

Output power (subwoofer)

(10 % THD, 6 Ω) ............................................50 W

Total harmonic distortion ...............0.7 % (at 5 W, 1 kHz, 4 Ω)

Audio input sensitivity/impedance ...........LINE: 600 mV/47 kΩ

Output level/impedance (LINE OUT) .............1000 mV / 10 kΩ

Frequency response ..................20 Hz to 20 kHz, +0 / –3 dB

Signal-to-noise ratio ...............................90 dB (IHF-A)

FM tuner section (without notes 100.1 MHz, 65 dBf)

Tuning range ..............87.5 MHz to 108.0 MHz (100 kHz steps)

Total harmonic distortion (1 kHz) ......................Mono: 1 %

Stereo: 1.5 %

Frequency response .............................40 Hz to 10 kHz

Stereo separation (1 kHz) .................................. 35 dB

Signal-to-noise ratio ................................Mono: 55 dB

Stereo: 46 dB

General

Power requirements .............................AC 120 V, 60 Hz

Power consumption .......................50 W (STANDBY: 1 W)

Dimensions (W x H x D)

8 1/2” x 4 3/8” x 13 5/8” (215 x 110 x 345 mm)

Weight (net) ...................................6 1/10 lb (2.75 kg)

L & R speakers

Type ...........................................2-way bass-reflex

Unit

Woofer ..........................................3 1/2” (88 mm)

Tweeter ........................................1 3/16” (30 mm)

Impedance ..................................................4 Ω

Max Input capacity .........................................25 W

Dimensions (W x H x D)

5 1/2” x 8 11/16” x 6 3/8” (140 x 220 x 162 mm)

Weight (net) .....................................3 1/2 lb (1.6 kg)

Speaker cable ..................................... 4 ft 11” (1.5 m)

Subwoofer

Type ................................................. Bass-reflex

Unit ................................................ 5” (127 mm)

Impedance ..................................................6 Ω

Max Input capacity .........................................50 W

Dimensions (W x H x D)

6 5/16” x 9 13/16” x 9 13/16” (160 x 250 x 250 mm)

Weight (net) ....................................6 3/16 lb (2.8 kg)

Speaker cable .....................................9 ft 10” (3.0 m)

Standard Accessories

Speaker x 2

Subwoofer x 1

FM antenna x 1

Remote control unit (RC-1271) x 1

Batteries (AAA, R03, UM-4) x 2

RCA video cable x 1

Owner’s manual (this document) x 1

Warranty card x 1

< Design and specifications are subject to change without notice.

< Weight and dimensions are approximate.

< Illustrations may differ slightly from production models.

1 2 ... 40 41 42 43 44 45 46 47 48

Comments to this Manuals

No comments

Teac MCDV600 User Manual Page 45

Comments to this Manuals

Related products and manuals for Acoustics Teac MCDV600