Teac DV-RA1000HD User Manual download pdf (Page 19)

4 − Basic operations

TASCAM DV-RA1000HD 19

LCD screens

The DV-RA1000HD LCD panel enables you to view

the status of the recorder, set the menu parameters,

make the switch settings, and set up the effects.

Home screens

The “home” screens display current information

regarding the mode and status of the recorder. There

are two types of home screens, depending on whether

a CD-R/CD-RW disc or DVD±RW/HD is being used.

These screens are view-only and non-editable. You can

access the screens assigned to the switches by pressing

the function keys. (See “The “home” screen” on page

20.)

Menu screens

The menu screens enable you to set up the system, proj-

ects, discs, copy functions, and other functions. Press

the MENU key to display the main menu. (See “Menu

operations” on page 21.)

Virtual front panel (VFP)

The virtual front panel allows access to various switch-

es on the screen that are not accessible on the front

panel. Press the ENTER key from the home screen to

display the virtual front panel. (See “The virtual front

panel (VFP)” on page 23.)

Other screens

The DV-RA1000HD also features special screens for

effects settings, input level settings, and the locate list.

You can recall these screens by pressing dedicated keys.

A typical screen on the DV-RA1000HD

features five switches on the bottom. Press

one of the function keys (F1 - F5) to execute

a function or open a screen assigned to the

corresponding key.

Press the F1 or F2 key (up/down) to select an

item in the screen.

•

Use the JOG/DATA dial to adjust a value or

setting.

Press the ENTER key to confirm a setting or

selection in the screen.

•

Navigating the screens

To adjust the display contrast:

While pressing and holding the

DISPLAY

key, turn the

JOG/DATA

dial to adjust the contrast to suit your light-

ing and viewing angle.

NOTE

You cannot use the JOG/DATA keys on the remote

control unit to adjust the display contrast.

Adjusting the display contrast

Shut down

In order to shut down the DV-RA1000HD safely with a

disc loaded, follow the steps below.

NOTE

During the shut down process, the DV-RA1000HD

writes all the UDFMI data to the DVD±RW disc. (See

“Writing the UDFMI” on page 40.

)

1 With a disc loaded, press and hold the OPEN/

CLOSE (SHUT DOWN) key for at least a second.

2 A popup menu appears. Press ENTER to do shut-

down, or CANCEL to return (if you pressed the

OPEN/CLOSE key accidentally for a long time, for

example).

3 All front panel controls are disabled. When it has

nished, a popup message appears telling you

that you can turn off the DV-RA1000HD using

the POWER switch.

NOTE

If you turn off the POWER switch without perform-

ing the shut down operation, the DV-RA1000HD

will automatically perform the shut down process,

then turn itself off. (If you turn off the POWER switch

during the format or copy operation, the unit will

perform the shut down process after the format or

copy operation is complete.)

If you turn on the POWER switch before the unit

turns itself off, it will still execute the shut down

process. In this case, turn off the power to the unit

after it completes the shut down operation.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 67 68

Comments to this Manuals

No comments

Teac DV-RA1000HD User Manual Page 19

Comments to this Manuals

Related products and manuals for Players Teac DV-RA1000HD